Transition Settings - NovaStar NovaPro UHD User Manual

− Deleting LOGO
Click
− Editing LOGO
Click
LOGO.

LOGO operations in PVW area
After a LOGO is added to the PVW area, you can lock, unlock or read back the LOGO.
− Locking or unlocking LOGO
Right click the LOGO and select Lock in the context menu to lock the LOGO. After locked, the LOGO
cannot be deleted.
After locked, right click the LOGO and select Unlock in the context men to unlock the LOGO. After
unlocked, the LOGO can be deleted.
− Reading back LOGO
When you refresh the Web page or log in to the system again, the PVW area does not display the
LOGO image. Right click the LOGO and select Read Back to display the LOGO in the PVW and PGM
area.

7.3.6 Transition Settings

Figure 7-23 Transition settings

SWAP: When selected, click TAKE or CUT to interchange the PVW and PGM display. When deselected,
the PVW and PGM displays are the same.

Cut: Set the PVW to PGM transition effect.
www.novastar.tech
next to a LOGO and select OK in the displayed dialog box to delete the selected LOGO.
next to a LOGO to pop up the LOGO settings window to re-edit or replace the current
NovaPro UHD All-in-One Controller User Manual
79