Settings - NovaStar NovaPro UHD User Manual

6.4 Settings


Firmware Update: Update the firmware through a USB drive. Click

Factory Reset: When multiple device units are linked, select the device to be reset from the drop-down list
and reset all its parameters to defaults.
− Save IP: Reset the device parameters to factory settings, but save the device IP address.
− Reset all: Reset all the device parameters to factory settings.

Network Settings: Select DHCP or Static and set the device IP address, subnet mask and gateway of the
device.

Diagnostics: Diagnose the device when the device fails and send the result to the technical support of
NovaStar to solve the problems as soon as possible.

Date and Time: Set the device date and time.

Administrator: Set or change the user password.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
to select the upgrade file.
52