Logo; Adding Logo - NovaStar NovaPro UHD User Manual

All-in-one controller

Hide thumbs Also See for NovaPro UHD:

Table of Contents

After an OSD is added to the PVW area, you can lock, unlock or read back the OSD.

− Locking or unlocking OSD

Right click the OSD and select Lock in the context menu to lock the OSD. After locked, the OSD

cannot be deleted.

After locked, right click the OSD and select Unlock in the context men to unlock the OSD. After

unlocked, the OSD can be deleted.

− Reading back OSD

When you refresh the Web page or log in to the system again, the PVW area does not display the OSD

image. Right click the OSD and select Read Back to display the OSD in the PVW and PGM area.

7.3.5 LOGO

Add LOGO images to the Web page and send those images to the NovaPro UHD.

Step 1 On the Programming page, click LOGO on the left to show the LOGO list.

Figure 7-21

LOGO list

Step 2 Click Image to pop up a window where you can select a LOGO image.

Step 3 Select a desired local image, and then click Open to pop up the LOGO settings window.

www.novastar.tech

NovaPro UHD All-in-One Controller User Manual

Table of Contents