Step 2 Go to Screen Settings > Advanced Configuration, and press the knob to enter the advanced configuration
screen.
Step 3 Turn on the advanced configuration function, and then set the cabinet row and column quantities, horizontal
offset, vertical offset and data flow for the target Ethernet port.
Figure 5-4 Advanced configuration
5.3.3 Save to RV Card
Send and save the screen configuration to the receiving card. The configuration data will not be lost after the
device is powered off.
5.3.4 More Settings
Mapping
Mapping is used to show the relations between the cabinets of LED screen and the sending devices. You can
view or check the connections between the cabinets.
Note:
This function is only applicable to the receiving cards that are connected to the NovaPro UHD support the
mapping function. For the related receiving card information, please visit our official website
www.novastar.tech.
Figure 5-5 Mapping
P:05 indicates the Ethernet port number of the sending device.
#001 indicates the number of the cabinet loaded by the Ethernet port.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
10