Menu Operations; Quick Screen Configuration; Step 1 Setting Input Mode - NovaStar MCTRL4K User Manual

MCTRL4K LED Display Controller
User Manual
The MCTRL4K is powerful and easy to use. You can quickly configure the LED The MCTRL4K is powerful and easy to use. You can quickly configure the LED The MCTRL4K is powerful and easy to use. You can quickly configure the LED
screen to light it up and display the entire input source following steps in screen to light it up and display the entire input source following steps in screen to light it up and display the entire input source following steps in
Screen
screen display effect.

7.1 Quick Screen Configuration

7.1 Quick Screen Configuration 7.1 Quick Screen Configuration

7.1.1 Step 1 Setting Input Mode

7.1.1 Step 1 Setting Input Mode 7.1.1 Step 1 Setting Input Mode
The input mode settings include DVI mode, input source and mosaic mode settings. The input mode settings include DVI mode, input source and mosaic mode settings. The input mode settings include DVI mode, input source and mosaic mode settings.
Figure 7-1 Input mode settings Figure 7-1 Input mode settings Figure 7-1 Input mode settings


www.novastar.tech
Configuration. With other menu settings, you can further improve the LED . With other menu settings, you can further improve the LED . With other menu settings, you can further improve the LED
In mosaic mode, the input source can be Auto, DP, HDMI or DVI×2.
When the input source is Auto, the device will detect the inputs
−
automatically in the order of DP > HDMI > DVI.
In this mosaic mode, you can set the DVI mosaic mode. The mosaic mode
−
can be "top and bottom" or "side by side".
In multi-card mode, the input sources can be DVI 1 and DVI 2.
The MCTRL4K works as two independent sending cards and the loading
−
capacity of each card is up to 3840×1080@60Hz. The images of both DVI 1
and DVI 2 input sources can be displayed on LED display simultaneously,
but they cannot be set at the same time.
The DVI 1 corresponds to Ethernet ports 1–8 or OPT1, and DVI 2
−
corresponds to Ethernet ports 9–16 or OPT2.
7

Menu Operations

Menu Operations Menu Operations
7 Menu Operations
7.1 Quick
14