Access Module Data In Studio 5000 Logix Designer Software; Configure Studio 5000 Logix Designer And The 1756-En2T Communication Module For Cip Sync - Rockwell Automation Allen-Bradley ArmorBlock 1732E-IB8M8SOER User Manual
Ethernet/ip dual port 8-point sequence of events input and scheduled output modules
Table of Contents
Advertisement
Access Module Data in
Studio 5000 Logix Designer
Software
Configure Studio 5000 Logix
Designer and the 1756-EN2T
Communication Module for
CIP Sync
Use the following information to use the 1732E-IB8M8SOER, 1732E-OB8M8SR
data in the ladder logic program.
Use the controller tags in your ladder program to read input data or write
output data.
•
For Studio 5000 Logix Designer programming instructions, see Studio
5000® Logix Emulate™ Getting Results Guide, publication
GR016.
•
For ControlLogix controller information, see ControlLogix System User
Manual, publication 1756-UM001.
In Studio 5000 Logix Designer version 18 or later, see the Integrated
Architecture and CIP Sync Configuration Application Technique, publication
IA-AT003
for instructions on configuring the 1756-EN2T communication
module and the ControlLogix processor so that the processor can function as
the PTP (CIP Sync) master clock.
Rockwell Automation Publication 1732E-UM003D-EN-E - November 2021
Chapter 6
Configure the Module Using Studio 5000 Logix Designer Software
LGEM5K-
45
Advertisement
Table of Contents
