WAGO-I/O-SYSTEM 750
753-668/000-004 4FAI 0/4-20 mA Diff PROFIsafe
4.14
Enabling/Disabling Channels
Each of the four analog inputs can be individually enabled or disabled. Whether a
channel is enabled or disabled is indicated by the LEDs on the F I/O module, see
Section "Device Description" > ... > "Indicators".
The settings are made via the "Channel" parameter, which is described in
Section "Commissioning" > ... > "Setting Parameters".
Version 1.0.0, valid from HW/SW Version 01/01
Functions
65
Manual