Figure 10: Navigation Between Channels; Table 34: Overview Of The Navigation Bar Menu Items - WAGO 750-563/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR

Figure 10: Navigation Between Channels

You can choose between the following menu items:

Table 34: Overview of the Navigation Bar Menu Items

Menu Item
There are three pages for each channel: Settings, Offset/Gain and Process Data.
You can change and set parameters on the Settings and Offset/Gain pages.
Modified settings are labeled with a change icon
displayed values are no longer the same as the originally queried values of the
I/O module. The [Write] button is then active in the toolbar. To transfer the new
Marking
[Channel 1] opens a tree structure with settings,
offset/gain and process data for channel 1.
[Settings] opens a page where settings, e.g.,
operating mode, number format, output, etc. can be
made.
[Offset/Gain] opens a page for setting offset/gain.
[Process Data] opens a page for setting the process
data.
[Channel 2] opens a tree structure with settings,
offset/gain and process data for channel 2.
[Settings] opens a page where settings, e.g.,
operating mode, number format, output, etc. can be
made.
[Offset/Gain] opens a page for setting offset/gain.
[Process Data] opens a page for setting the process
data.
Process Image
, which indicates that the
Version 1.3.0
43
Manual