Glossary - WAGO 753-668/000-004 Manual

154 Glossary

Glossary
13
A
Acknowledgement
See "Operator Acknowledgement (OA)".
Actuator
Final controlling element, valve, signal lamps, relays, motor contactor with force-
guided contacts.
C
CAGE CLAMP
CAGE CLAMP
GmbH & Co. KG.
Configuration Program
The configuration program is used to configure hardware and to create the safety
program of the safe PLC.
CPD Tool (Configuration Parametrization and Diagnostics Tool)
The CPD tool can be used to parameterize, configure and diagnose device
functions of safe field devices (see also "WAGO Parameterization Tool" and
"WAGO Safety Editor").
CRC (Cyclic Redundancy Check)
The cyclic redundancy check is a procedure for determining a test value for data
to detect errors during transmission or storage.
Cat. (category)
The categories (cat.) of EN ISO 13849-1 (B, 1, 2, 3 and 4) specify the required
behavior of a safe device in terms of its resistivity to errors based on its design.
Manual
Version 1.0.0, valid from HW/SW Version 01/01
753-668/000-004 4FAI 0/4-20 mA Diff PROFIsafe
®
®
is a registered trademark of WAGO Kontakttechnik
WAGO-I/O-SYSTEM 750