84
Connect Devices
Figure 29: Infeed for F I/O Modules 750-66x and 753-66x
Do not exceed maximum current via power contacts!
The maximum current that can flow through the power jumper contacts is 10 A.
The power jumper contacts can be damaged when the maximum is exceeded.
When configuring the system, do not exceed this current. If it is exceeded, an
additional internal system supply module must be used.
Manual
Version 1.0.0, valid from HW/SW Version 01/01
753-668/000-004 4FAI 0/4-20 mA Diff PROFIsafe
WAGO-I/O-SYSTEM 750