Coding; Figure 20: Attachment Of Cable Binders; Figure 21: Assembling The Coding Fingers; Figure 22: Inserting The Coding Fingers - WAGO 753-668/000-004 Manual

WAGO-I/O-SYSTEM 750
753-668/000-004 4FAI 0/4-20 mA Diff PROFIsafe

Figure 20: Attachment of Cable Binders

6.3.1

Coding

Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1. Insert the pin into the socket.

Figure 21: Assembling the Coding Fingers

2. Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).

Figure 22: Inserting the Coding Fingers

3. Place the plug onto the I/O module.
Version 1.0.0, valid from HW/SW Version 01/01
Mounting 79
Manual