Table 31: Setting Options For I/O Module 750-469/003-000; Table 32: Offset/Gain Values - WAGO 750-469 Manual

WAGO-I/O-SYSTEM 750
750-469 2AI Thermocouple

Table 31: Setting options for I/O module 750-469/003-000

Selection box
Number format
Filter constant
Cold junction
compensation
Wire break detection
User scaling
WAGO scaling
*
default settings
In WAGO-I/O-CHECK the following input boxes allow you to set the offset and
gain values of the user and manufacturer scaling.

Table 32: Offset/gain values

Input field
User scaling
WAGO scaling
Additional information
Detailed information about configuring this I/O module is available in the
documentation for the WAGO-I/O-CHECK commissioning tools and on the
Internet at www.wago.com.
The I/O module can also be parameterized via PROFIBUS and PROFINET
device description (GSD file). The parameterization description can be found in
the appendix in Section "Configuration and Parameterization via GSD File with
PROFIBUS DP and PROFINET IO."
Manual
Version 1.1.0
Possible Settings
Two's Two's complement representation
*
complement
Sign Amount/sign representation
magnitude
12.5 Hz – 640 ms / 50 Hz – 320 ms
100 Hz – 160 ms / 200 Hz – 80 ms
deactivated Do not compensate for cold junction
temperature
*
activated Compensate for cold junction temperature
deactivated Wire break monitoring disabled
*
activated Wire break monitoring enabled
*
deactivated User scaling disabled
activated User scaling enabled
deactivated WAGO scaling disabled
*
activated WAGO scaling enabled
... Offset
... 0x0000
... 0x0000
Process Image
Gain
0x0100
0x00A0
37
*
/