048: St. Env. Phaser (Stereo Envelope Phaser) - Korg Krome Parameter Manual

048: St. Env. Phaser (Stereo
Envelope Phaser)
This stereo phaser uses an envelope generator for
modulation. You will obtain the same pattern of phasing
each time you play. You can also control the Phaser directly
using the modulation source.
Stereo In - Stereo Out
Left
Right
D-mod
D -mod
EG Attack/Decay
EG
L Manual
0...100
Bottom
a
L Manual Top 0...100
R Manual
0...100
Bottom
b
R Manual Top 0...100
Sweep Mode EG, D-mod
c
Src Off...Tempo
EG Attack 1...100
d
EG Decay 1...100
e Resonance –100...+100
High Damp
f 0...100
[%]
–Wet...
Wet/Dry –1 : 99, Dry,
1 : 99...Wet
g
Src Off...Tempo
Amt –100...+100
276
Phaser
Resonance
High Damp
Phaser
Sweep Mode
Sets the lower limit of the
frequency range for the effect on
the left channel
Sets the upper limit of the
frequency range for the effect on
the left channel
Sets the lower limit of the
frequency range for the effect on
the right channel
Sets the upper limit of the
frequency range for the effect on
the right channel
Determines whether the flanger
is controlled by the envelope
generator or by the modulation
source p.273
Selects the modulation source
that triggers the EG (when EG is
selected for Sweep Mode), or
modulation source that causes
the flanger to sweep (when D-
mod is selected for Sweep
Mode) p.273
Sets the EG attack speed
p.273
Sets the EG decay speed
p.273
Sets the resonance amount
p.273
Sets the resonance damping
amount in the high range
p.274
Sets the balance between the
effect and the dry input
p.259, p.273
Selects a modulation source for
Wet/Dry
Sets the modulation amount for
Wet/Dry
Wet / Dry
Wet / Dry