Monitoring The Device; Performing A Firmware Update - Kaco blueplanet 87.0 TL3 Manual

Country- Level Display/
spec. Set- Setting
tings
Export Service Package
1 2 3 4 4
Network Statistics
1 2 3 4 4
Remote Access
1 2 3 4 4
History
1 2 3 4 4
Account Management
1 2 3 4 4
Restart the Device
1 2 3 4 4
NOTE
With regard to the selection of country settings, KACO new energy attests:
› that the relevant certificates are only valid if the corresponding country settings have been selected.
› that all configured grid parameters must be configured in accordance with the requirements of the
grid operators.
› that the configuration of parameters using IEEE 1547: 2003 table 1 is possible but is only permitted if it
is requested by the grid operators.
NOTE
Setting values according to pictogram
please note the slider in the web interface.
9.5

Monitoring the device

↻ You have connected the device to your network.
1 When using a DHCP server: Activate DHCP.
2 For manual configuration (DHCP off):
3 Open the Settings/Network menu.
4 Assign a unique IP address.
5 Assign a subnet mask.
6 Assign a gateway.
7 Assign DNS server.
8 Save your settings.
9.6

Performing a firmware update

NOTE
The DC power supply must be guaranteed during initial start-up.
The sequence of the settings required for initial start-up is preset in the configuration assistant.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
Action in this menu/meaning
NOTE: Possibility to send an error log to KACO new energy.
F Press Export button and send file to our service staff.
NOTE: Display of sent and received data packets
F Press Update.
When remote access is enabled, KACO can access the device remotely
and assist you.NOTE: .
F Activate when prompted.
NOTE: Displays all of the actions performed in the system and on the
web interface.
1 Enter your User name.
2 Enter your new user-defined Password.
NOTE: The following is specific to KACO: Following initial start-up, it is
necessary to Change password
NOTE: Transfer safety-related parameters to a storage medium.
F If necessary, re-start the device.
refer only to the blueplanet 125TL3 device type. For your device
Page 65