Kaco blueplanet 87.0 TL3 Manual page 67

2 Cover for USB port
Depending on how long the buttons are held down for and the chosen button combination, multiple functions are avail-
able. The flashing sequence of the status LEDs on the front side of the housing provides information about each of the
functions initiated by way of the multi-function buttons.
The following principles are applied when keys and LEDs are used:
ž Briefly pressing the right-hand multi-function button (~ 0.5 sec.) serves to confirm that the desired function should
commence.
ž If the Operating LED and the Feed-in LEDs are flashing quickly and in tandem (~0.2 sec.), this indicates that a function
has commenced.
ž If the Operating LED and the Feed-in LEDs are flashing quickly yet alternately (~ 0.2 sec.), this indicates that a function
is being performed (for functions that take a long time to complete, such as firmware updates).
ž If the Operating LED and the Feed-in LEDs are flashing slowly and in tandem (~ 1 sec), this indicates that a function has
been completed successfully.
ž If the Fault LED is flashing slowly (~ 1 sec), this indicates that a function has not been completed successfully or a
timeout has occurred at the confirmation stage.
Depending on how long the buttons are held down for and the chosen button combination, multiple functions are avail-
able. Information is provided by way of the flashing sequence of the 3 status LEDs on the housing cover.
Signal Icon LED status
"Operating" LED illumin-
ated
"Operating" LED and
"Feed-in" LEDs flashing
in tandem
"Operating" LED and
"Feed-in" LEDs flashing
quickly and in tandem
"Operating" LED and
"Feed-in" LEDs flashing
quickly yet alternately
"Fault report" LED flash-
ing quickly
"Fault report" flashing
slowly
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
Meaning
Procedure in progress
Procedure completed successfully.
Procedure has commenced.
Procedure has commenced.
The procedure has not been com-
pleted successfully or a time limit
for pressing a button again has
elapsed.
No fault
Note
The procedure will: last up to 10
mins for firmware updates or up
to 30 secs for parameter up-
dates.
Page 67