Kaco blueplanet 87.0 TL3 Manual page 68

9.8.1 Operation
Firmware update / configuration import using multi-function buttons
Action / step sequence
F Insert a USB stick featuring the firmware up-
date package or a configuration file into the
USB port.
-
F Briefly (< 1 sec) press the right-hand func-
tion button to commence the procedure.
-
-
F Remove the USB stick.
-
NOTE: If a button is not pressed within 15 secs:
no valid file found.
NOTE: Procedure failed.
Setting the network parameters to the factory defaults using the multi-function buttons
Action / step sequence
F Press the left-hand function button (> 5
secs) to commence the procedure.
-
F Release the function key.
F Press the right-hand function button (~0.5
secs) to commence the procedure.
-
NOTE: If a button is not pressed within 15 secs:
Procedure aborted.
Connecting the device to the grid using the multi-function buttons
Action / step sequence
NOTE: Starts from status "Device disconnec-
ted"
F Press the right-hand function button (> 5
secs) to commence the procedure.
-
Page 68
RB
LB
RB
LB
LB RB
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
Notifications / function
The import is aborted if none of these
files are found.
NOTE: Valid file found.
Confirm that the procedure should com-
mence.
Procedure is carried out.
Procedure completed. USB stick can be
removed.
-
NOTE: Once the USB stick has been re-
moved, the device reboots and features
the updated data.
Procedure is aborted. USB stick can be re-
moved.
USB stick can be removed.
Notifications / function
Procedure is carried out.
Procedure completed. Network settings
have been reset.
Notifications / function
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3