Kaco blueplanet 87.0 TL3 Manual page 38

MODBUS RTU
RS485
Wireless AP
ARGUS
DC
BP125
SC
Fig. 53: Start-up via a direct WiFi connection
Application
The planned network infrastructure or AC-coupling is not yet in place or has not been completed.
A DC supply to the KACO inverter is sufficient for start-up.
Required components
ž WiFi-compatible notebook, tablet or smartphone (Android or iOS devices can be used).
ž USB WiFi stick (KACO accessory, type: WLAN adapter Digitus 150 N micro article no.: 3013222)
Establishing a connection to the KACO device via WiFi
1 Connect the USB WiFi stick to the device and connect to the access point generated by the device using a notebook
or mobile device. Every device generates a unique AP-name based on its serial number so that it is possible to install
several devices at the same time if multiple WiFi sticks happen to be available.
2 Name of access point: <Device designation serial number> (e.g. "bp87-0-<serial number>" or "bp150-<serial num-
ber>")
3 Password: kacowifi
4 Launch the browser on the terminal device and enter server name a) or server address b):
5 http:// 192.168.1.1
» The device configuration page is displayed.
1 At the Login/register icon, log in as:
2 User name: user
3 Pass word: kaco user
Page 38
Tablet
Notebook
Smartphone
Local clients
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
Fig. 54: Login screen
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3