Description Of The Device; Mode Of Operation; Device Diagram - Kaco blueplanet 87.0 TL3 Manual

Photovoltaic feed-in inverter
Hide thumbs Also See for blueplanet 87.0 TL3:
Table of Contents

Advertisement

3

Description of the device

3.1

Mode of operation

The device converts the DC voltage generated by the PV-modules into AC voltage and feeds this into the power grid. The
starting procedure begins when there is sufficient sunlight and a specific minimum voltage is present in the device. The
feed-in process begins once the PV generator has passed the insulation test and the grid parameters are within the re-
quirements imposed by the grid operator for a specific monitoring time. If, as it gets dark, the voltage drops below the
minimum voltage value, feed-in mode ends and the device switches off.
3.2

Device diagram

4
3
2
1
Fig. 3: Device diagram - S version
Key
1
Housing
2
Cover
3
Status indicator
4
Upper cover
5
AC connection / cable feed-through
3.2.1
Mechanische Komponenten
DC isolator switch (not present in S version)
The DC isolator switch is located on the housing door. of the device. The DC isolator switch is used to disconnect the in-
verter from the PV generator in order to carry out service.
Disconnecting the device from the PV generator
F Switch the DC isolator switches from 1 (ON) to 0 (OFF).
Connecting the device to the PV generator
F Switch the DC isolator switches from 0 (OFF) to 1 (ON).
3.2.2
Electrical functions
A potential-free relay contact is integrated into the device. Use this contact for one of the following functions:
Potential-free relay
The potential-free relay contact closes as soon as there is a fault during operation. You use this function, for example, to
signal a fault visually or acoustically.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
2
5
1
5
6
7
8
Fig. 4: Device diagram - XL version
6
7
8
9
4
3
9
Interface / cable feed-through
Communication - button / USB port
DC connection / cable feed-through
DC isolator switch (not present in S version)
OFF
Fig. 5: DC isolator switch
5
6
7
8
ON
Page 9

Advertisement

Table of Contents
loading

Table of Contents