User Interface - Kaco blueplanet 87.0 TL3 Manual

Operating status
Error
9.3

User interface

NOTE
Depending on the tolerances of the measuring elements, the measured and displayed values are not al-
ways the actual values. However, the measuring elements ensure maximum solar yield. Due to these toler-
ances, the daily yields shown on the display/Monitor may deviate from the values on the grid operator's
feed-in meter by up to 15%.
Operation mode
Previous page
Status history
Fig. 58: Monitoring interface
Page 44
LED Icon Description
The red "Fault" LED is lit.
Error on AC/DC source
Conditional special cases:
ž There is no DC voltage present (e.g. DC isolator switch open)
ž DC voltage too low (< starting voltage)
ž DC voltage is present (> starting voltage), but communications con-
nection between the front end (operating unit) and back end (control
unit) is faulty, or interrupted.
Activity indicators for
communication interfaces
Current
meassurements
Selected
meassurements
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
Main Menu
Reactive power factor
Current power
Next page
Current reactive power
Activity displays
cumulative yield
String Combiner (Opitonal)
Inverter AC
Inverter DC
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
Language
Export