Kaco blueplanet 87.0 TL3 Manual page 64

Country- Level Display/
spec. Set- Setting
tings
Factory defaults
1 2 3 4 4
Export config
Import configuration
Password protection
1 2 3 4 4
Country selection |
Connection conditions
| Advanced islanding
detection | FRT | ... | ...
|
System / Maintenance
1
2 3 4
Firmware update
1 2 3 4 4
Settings
1 2 4 4
3
Allow remote firmware
update
Status
Instant Update
1 2 3 4 4
Check for Available
1 2 3 4 4
software packages
Installation Wizard
1 2 3 4 4
Service
1 2 3 4 4
Service Status
1 2 4 4
3
Date | Yield | Date v
Yield (first in)
Service Log
1 2 3 4 4
Page 64
Action in this menu/meaning
1 Compare country-specific /network-specific parameters with basic
setting value.
2 If necessary, reset parameters using the "Restore" button.
1 Display for exporting all parameters.
2 Assign password.
3 Select the parameters for export into a file or the plant manager.
1 Select the parameter file using the "Browse" button.
2 Import the parameters using the "Upload" button.
1 Opportunity to set up password protection for individual paramet-
ers.
2 Confirm the action field.
NOTE: Fundamental system and maintenance data with the initial
start-up installation assistant.
NOTE: Opportunity to update the device. Parameter data are not over-
written when the firmware is updated.
NOTE: Settings for updating the firmware via remote access.
F Activate remote access for updates.
Enter firmware update URL .
1 Enter user name and password.
2 Specify the start and end time for the update.
3 Confirm the action field.
1 Select and confirm the firmware update file via Browse...
2 Perform the upload.
↻ Network connection available.
1 Checks for available device updates online using the existing net-
work connection.
2 Start the firmware update by clicking the button.
NOTE: The installation wizard is described in the chapter Start-up op-
tions [See section 8.4} Page 35].
When the installation process is complete, the text: Installation wizard
was completed appears
NOTE: Opportunity to specify the service interval.
1 Specify the service sequence.
2 Specify the service by date.
3 Specify the service by yield [kwh].
4 Confirm the action field.
NOTE: Display of all logged installations. You should also add all main-
tenance activities manually via the "Service" and "Installer" interface.
1 Enter additional service activities (exception: "user" interface)
2 Export service logs on demand.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3