Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual page 84

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815
CAUTION!
WARNING!
WARNING!
BAL0815-0002d-US
www.conductix.us
Alert personnel to the hazard!
→ Attach a sign saying "Risk of death by electrocution" with the relevant hazard symbol in all areas
with access to live components
Fire hazard due to overload or sparking!
A fire hazard can occur due to overloads of the cable, electrical arcing, or short-circuits.
→ Before recommissioning, ensure that all work has been completed and all components have been
properly installed
→ Conduct electrical testing as prescribed
→ Permissible current values must be observed.
→ Electrical fuses must be installed in accordance with regulations.
→ Warn against misuse
→ Do not store easily ignited materials near to conductor-rails.
→ Dimensioning according to permissible system load capacity and provide for appropriate electrical
protective devices
Risk of injury due to hot components!
Components can get hot during operation.
→ Operation is only permitted in areas inaccessible to the public and out of manual reach.
→ The hazard zone must be enclosed by the customer or protection ensured by distance
→ Cordon off the work area
→ Caution when working in the vicinity of the danger zone, in particular if protective devices (covers,
enclosures, control devices) have been removed or disabled
→ Use personal protective equipment!
translated document page 84 of 94