Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual page 83

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815
DANGER!
CAUTION!
DANGER!
Before working on these components!
→ Disconnect the conductor-rail system from the power supply according to the 5 safety rules
CAUTION!
Before switching the system on!
CAUTION!
BAL0815-0002d-US
www.conductix.us
Risk of injury due to grasping or impact!
Grasping and/or impact with moving conductor-rails (slip ring) or current collectors connected to the
machine and other components must be prevented.
→ Cordon off the work area
→ Caution when working in the vicinity of the danger zone, in particular if protective devices (covers,
enclosures, control devices) have been removed or disabled
→ Use personal protective equipment!
Risk of puncture wounds and cuts!
The packaging material can contain sharp objects such as nails and wood splinters that can cause
injury to limbs.
→ Use personal protective equipment!
→ Cordon off the work area!
→ Caution when working in the vicinity, in particular below the conductor-rail
Risk of death by electrocution!
Contact with components carrying electrical power can lead to death by electrocution or severe in-
jury. Danger of injury due to shock reactions, falling or being thrown across the room due to electri-
cal shock.
→ The main power supply (from the building) must be disconnected in the installation area and se-
cured against switching on again
→ Disconnect all electricity-supply power feeds
→ When decommissioning, check whether a voltage is still present in the components and take
measures where necessary
→ The hazard zone must be enclosed by the customer or protection ensured by distance
→ The customer must ground metallic components
→ The customer must provide protective devices
→ Make sure there is sufficient stability in the area
and secure it against being switched back on. For the 5 safety rules, see chapter 2.5.
→ Every time before the device or system is started, measure the insulation resistance according to
locally applicable technical standards, directives and legal regulations.
→ Carry out locally required electrical tests
translated document page 83 of 94