Packaging; Storage Of Packaged Parts - Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815

5.3 Packaging

The individually packaged parts have been packed in accordance with the anticipated transport conditions. Only environmentally
friendly materials have been used for packaging.
The packaging is designed to protect the individual components from transport damage, corrosion and other damage until installation.
As a result, do not destroy the packaging and remove it only shortly before installation.
Handling packaging materials:
Dispose of packaging material according to valid legal regulations and local guidelines.
WARNING!

5.4 Storage of packaged parts

Packaged parts must be stored under the following conditions:
Do not store outdoors

Store in a dry, dust-free place

Do not expose to aggressive media

Protect from direct sunlight

Avoid mechanical vibrations.

Storage temperature: –30°C to +55°C

Relative air humidity: Maximum 60% without condensation

When storing for more than 3 months, check the general condition of all parts and the packaging at regular intervals. If necessary,

refresh or replace the preservative
ATTENTION!
BAL0815-0002d-US
www.conductix.us
Environmental damage due to improper disposal!
Packaging materials are valuable resources and can be reused or usefully processed or
recycled in many cases.
→ Dispose of packaging materials in an environmentally appropriate manner.
→ Comply with locally applicable disposal guidelines; if necessary, engage a specialist to
handle disposal.
In some cases, there may be instructions for storage on the packaged parts that go
beyond the requirements listed here.
→ Follow the instructions accordingly
translated document page 32 of 94