Table of Contents
Advertisement
Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815
8 Operation
The only operations required to operate the conductor-rail system are switching the power supply on and off to stop/activate the
system, see chapter 8.2.
The safety information in chapter 8.1 must be observed to guarantee safety during operation.
Only operate the conductor-rail system in areas inaccessible to the public!
WARNING!
8.1 Safety
The system must only be operated by trained personnel!
ATTENTION!
Danger for unauthorized personnel!
Unauthorized personnel are not familiar with the hazards in the working area.
→ Keep unauthorized personnel out of the working area
WARNING!
→ In case of doubt, address such persons and direct them away from the working area
→ Stop work as long as unauthorized persons are in the working area
Requirement:
Risk of injury due to entrapment!
There is a risk of being trapped by moving parts when the system is in operation.
→ Do not enter the danger zones of the system during operation
DANGER!
In order to comply with the most important measures for protection against hazards, the measures specified in chapters 2 and 3
must be observed. For information on foreseeable incorrect applications or unsuitable ambient conditions see especially chapters
2.5 and 3.3.
BAL0815-0002d-US
www.conductix.us
Operation is only permitted in areas inaccessible to the public and out of manual reach.
→ The hazard zone must be enclosed by the customer or protection ensured by distance!
translated document
page 68 of 94
Advertisement
Table of Contents
Need help?
Do you have a question about the SingleFlexLine Program 0815 and is the answer not in the manual?
Questions and answers