Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual page 64

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815

DANGER!


→ Do not stand directly below the conductor-rail system
DANGER!
DANGER!
BAL0815-0002d-US
www.conductix.us
Risk of injury by crushing skin and limbs!
There is a danger of crushing of skin and limbs due to:
Spring force/gravity (stored energy)
Current collectors (spring force) during preassembly, installation, operation, maintenance and dis-
mantling (e.g., crushing of limbs between the current-collecting head and general components)
Moving parts, when the system is in operation
→ Do not enter the danger zones of the system during operation. The operator/system manufacturer
must ensure the technical protective measures are taken (covers, protection by distance, control
technology, etc.)
Fire hazard due to overload or sparking!
A fire hazard can occur due to overloads of the cable, electrical arcing, short circuits or the genera-
tion of sparks. Sparking can occur in poorly serviced, contaminated conductor-rails or if installation
does not comply with the required tolerances.
Take the following measures:
→ Conduct electrical testing as prescribed
→ Permissible current values must be observed.
→ Maintain tolerances during operation
→ Do not remove the prescribed electrical safety devices and protective devices
→ Do not store easily ignited materials near to conductor-rails.
→ Inspect, service, and clean conductor-rails regularly and in accordance with specifications see
chapter 12
→ Dimensioning according to permissible system load capacity and provide for appropriate electrical
protective devices
Risk of injury due to grasping or impact!
Grasping and/or impact with moving conductor-rails (slip ring) or current collectors connected to the
machine and other components must be prevented.
→ Cordon off the work area
→ Caution when working in the vicinity of the danger zone, in particular if protective devices (covers,
enclosures, control devices) have been removed or disabled
→ Caution when working in the vicinity of the danger zone, in particular below the conductor-rail
→ Falling conductor-rail system components if they have not been properly installed or if operated in
inappropriate operating conditions (e.g. environment that contains solvents)
→ Use personal protective equipment!
translated document page 64 of 94