Personnel Requirements; Qualifications - Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815

2.2 Personnel requirements

2.2.1

Qualifications

WARNING!
Only those persons are authorized as personnel who can be expected to perform their work reliably. People whose capacity for

reaction is influenced e.g. by drugs, alcohol, or medications are not authorized.
When selecting personnel, all age- and occupation-specific guidelines applicable at the deployment site must be observed.

The following qualifications have been mentioned in these operating instructions for certain areas of operation:
Qualified specialists

are, due to their specialized training, knowledge, experience and knowledge of applicable regulations, capable of carrying out
work assigned to them, while independently recognizing and avoiding possible risk.
Personnel are considered qualified if they have successfully concluded training, for example, as electricians, master electricians,
electrical engineers, or electrical technicians. Personnel are also considered qualified who have been employed correspondingly
for several years, have been educated in theory and practice during that time, and have whose knowledge and skills in the trade
required have been tested.
The operator of the machine or system must document that the corresponding certification, or other documentation of qualifica-
tion, is available or had been submitted previously.
The installation, maintenance and commissioning of electrical equipment may only be carried out by qualified personnel (electri-
cians) in accordance with local regulations. Work with higher installation positions usually requires additional qualifications and
certificates for the use of lifting devices and protective equipment. On the part the manufacturer, professional and proper handling
of components is required. It is recommended that the installation personnel be trained by the manufacturer or that accompani-
ment of the installation by specialist fitters/supervisor be scheduled.
Operators

have been instructed in an instruction session by the operator with respect to the tasks assigned to them and the potential
dangers arising from improper actions.
The operator of the machine or facility must document that the corresponding training has taken place.
Transport personnel

Trained person who transports the material indoors and outdoors in accordance with safety regulations.
BAL0815-0002d-US
www.conductix.us
Persons who are not adequately trained are at risk of injury!
Improper use can result in serious injury to persons and property.
→ All activities must only be performed by qualified personnel.
translated document page 8 of 94