Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual page 45

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815
Fig. 32: Comparison of correctly and incorrectly engaged rail
Fig. 33: Clip the hanger clamp into the conductor-rail
Standard hanger clamp for screwing on:
To fasten the standard hanger clamps, drill holes must be made in the EMS rail. The drilling jig for support profile height 180 mm
(Material-Nr. 2: 08-V015-0474-001) and the drilling jig for support profile 240 mm (Material-Nr. 2: 08-V015-0474-002) are available
to set the drill holes quickly and easily.
The holes for the hanger clamps are placed via the row of the female connector (1). The row of the female connector has markings
(2 and 3 see Fig. 33 and Fig. 34) indicating the distance between the drill holes of the hanger clamps (detail C). The drill hole distance
depends on the number of poles. The position of the holes can be adjusted in y-direction via the slotted holes (4).
BAL0815-0002d-US
www.conductix.us
1 1
2 2
translated document
Item Name
1 Guideway rail
2 Hanger clamp
page 45 of 94