Maintenance And Servicing; Safety - Conductix-Wampfler SingleFlexLine Program 0815 Operating Instructions Manual

Operating Instructions
Single-pole conductor-rail system
SingleFlexLine Program 0815

9 Maintenance and servicing

9.1 Safety

The system must only be serviced and maintained by specialist personnel!
Requirement:
Disconnect the system from power and secure against being switched on again.
Required protective equipment:
WARNING!
DANGER!
BAL0815-0002d-US
www.conductix.us
Risk of injury due to improperly executed maintenance and/or servicing tasks!
Improper or omitted maintenance or servicing work can result in serious injury to persons and/or ma-
terial damage. Loosely stacked or components and tools that are left lying around are a source of
danger. They are a trip hazards and improperly stored components can fall over or fall to the ground.
→ Before starting work, make sure there is sufficient space for assembly.
→ Make sure the installation area is tidy and clean!
→ If components have been removed, be careful to reinstall them properly, replace all fastening ele-
ments and comply with screw tightening torques
Risk of injury due to dust!
Dust due to abrasion (collector brushes, copper rails, plastic) can cause respiratory complaints,
choking and eye irritation.
→ Clean the system before starting work
→ Use personal protective equipment.
→ Safety goggles
→ Dust mask class FFP3
→ Protective gloves
→ Disposable coverall
→ Prevent contamination of the environment (e.g., people, goods, production facilities etc.) while
cleaning by taking appropriate measures (use covers, barriers, filter systems)
translated document page 72 of 94