SimCom SIM7500 Series At Command Manual page 373

Read Command
AT+CGPSINFO?
Write Command
AT+CGPSINFO=<time>
Execution Command
AT+CGPSINFO
Defined values
<lat>
Latitude of current position. Output format is ddmm.mmmmmm
<N/S>
N/S Indicator, N=north or S=south
<log>
Longitude of current position. Output format is dddmm.mmmmmm
<E/W>
E/W Indicator, E=east or W=west
<date>
Date. Output format is ddmmyy
<UTC time>
UTC Time. Output format is hhmmss.s
<alt>
MSL Altitude. Unit is meters.
<speed>
Speed Over Ground. Unit is knots.
<course>
Course. Degrees.
<time>
The range is 0-255, unit is second, after set
seconds.
Examples
AT+CGPSINFO=?
+CGPSINFO: (0-255)
SIM7500_SIM7600 Series_AT Command Manual_V1.07
OK
Responses
+CCGPSINFO: <time>
OK
Responses
OK
+CGPSINFO: [<lat>],[<N/S>],[<log>],[<E/W>],[<date>],[<UTC
time>],[<alt>],[<speed>],[<course>]
OK (if <time>=0)
Responses
+CGPSINFO: [<lat>],[<N/S>],[<log>],[<E/W>],[<date>],[<UTC
time>],[<alt>],[<speed>],[<course>]
OK
<time> will report the GPS information every the
Smart Machine Smart Decision
372 2017-12-25