Atq Set Result Code Presentation Mode; Atx Set Connect Result Code Format - SimCom SIM7500 Series At Command Manual

OK
3.22

ATQ Set Result Code Presentation Mode

Description
Specify whether the TA transmits any result code to the TE or not. Text information transmitted in
response is not affected by this setting
SIM PIN References
YES 3GPP TS 27.005
Syntax
Write Command
ATQ<n>
Execution Command
ATQ
Defined values
<n>
0 – DCE transmits result code
1 – DCE not transmits result code
Examples
ATQ0
OK
3.23

ATX Set CONNECT Result Code Format

Description
This parameter setting determines whether the TA transmits unsolicited result codes or not. The
unsolicited result codes are
<CONNECT><SPEED><COMMUNICATION PROTOCOL>[<TEXT>]
SIM PIN References
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
If <n>=0:
OK
If <n>=1:
No Responses
Responses
Set default value:0
OK
No Responses
Smart Machine Smart Decision
40 2017-12-25