At+Stgi Get Sat Information - SimCom SIM7500 Series At Command Manual

23 – get input
24 – select item
25 – set up menu
81 – session end (pdu mode only)
0 – none command
Examples
AT+STIN?
+STIN: 24
OK
11.2

AT+STGI Get SAT information

Description
Regularly this command is used upon receipt of an URC "+STIN" to request the parameters of the
Proactive Command. Then the TA is expected to acknowledge the
AT+STGR to confirm that the Proactive Command has been executed.
any user information, e.g. a selected menu item. The Proactive Command type value specifies to
which "+STIN" the command is related.
NOTE: Please check the format refered to AT+STKFMT
SIM PIN References
YES Vendor
Syntax
Test Command
AT+STGI=?
Write Command
AT+STGI=<cmd_id>
AT+STGI=<cmd_id>
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
OK
Responses
PDU format
+STGI: <cmd_id>,<tag>,<pdu_len>,<pdu_value>
OK
NOT PDU format, listed below:
If <cmd_id>=10:
OK
If <cmd_id>=21:
+STGI:21,<prio>,<clear_mode>,<text_len>,<text>
OK
If <cmd_id>=22:
+STGI: 22,< rsp_format>,< help>,<text_len>,<text>
OK
Smart Machine Smart Decision
AT+STGI response with
AT+STGR will also provide
238 2017-12-25