At+Cgauth Set Type Of Authentication For Pdp-Ip Connections Of Gprs - SimCom SIM7500 Series At Command Manual

AT+CGEREP=?
+CGEREP: (0-2),(0-1)
OK
AT+CGEREP?
+CGEREP: 0,0
OK
9.15 AT+CGAUTH Set type of authentication for PDP-IP connections of
GPRS
Description
This command is used to set type of authentication for PDP-IP connections of GPRS.
SIM PIN References
YES Vendor
Syntax
Test Command
AT+CGAUTH=?
Read Command
AT+CGAUTH?
Write Command
AT+CGAUTH=<cid>[,<aut
h_type>[,<passwd>[,<user>]
]]
AT+CGAUTH=,,<user>,<pa
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CGAUTH:, ,127 ,127(for CDMA1x-EvDo only)
+CGAUTH:(range of supported <cid>s),(list of supported
type> s),127,127
(NOTE: the first line of the response is for CDMA 1x and Evdo
only)
OK
ERROR
+CME ERROR: <err>
Responses
+CGAUTH: ,,"user ","passwd"(for CDMA1x-EvDo only)
+CGAUTH:[ <cid>,<auth_type>[,<user>,<passwd>]]<CR><LF>
...
OK
ERROR
+CME ERROR: <err>
Responses
OK
ERROR
Smart Machine Smart Decision
224
<auth_-
2017-12-25