At+Cscb Select Cell Broadcast Message Indication - SimCom SIM7500 Series At Command Manual

7.5

AT+CSCB Select cell broadcast message indication

Description
The test command returns the supported <mode>s as a compound value.
The read command displays the accepted message types.
Depending on the
accepted.
Note: This command not support in CDMA/EVDO mode
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command
AT+CSCB=?
Read Command
AT+CSCB?
Write Command
AT+CSCB=<mode>[,<mids
>[,<dcss>]]
Defined values
<mode>
0 – message types specified in
1 – message types specified in
<mids>
String type; all different possible combinations of CBM message identifiers.
<dcss>
String type; all different possible combinations of CBM data coding schemes(default is empty
string)
Examples
AT+CSCB=?
+CSCB: (0-1)
SIM7500_SIM7600 Series_AT Command Manual_V1.07
<mode> parameter, the write command adds or deletes the message types
Responses
+CSCB: (list of supported <mode>s)
OK
ERROR
Responses
+CSCB: <mode>,<mids>,<dcss>
OK
ERROR
Responses
OK
ERROR
+CMS ERROR:
<mids>
<mids>
Smart Machine Smart Decision
<err>
and <dcss> are accepted.
and <dcss> are not accepted.
159 2017-12-25