At+Cgpsinfo Get Gps Fixed Position Information - SimCom SIM7500 Series At Command Manual

Defined values
<on/off>
0 – stop GPS session
1 – start GPS session
<mode>
Ignore - standalone mode
1 – standalone mode
2 – UE-based mode
3 – UE-assisted mode
<lat>
Latitude of current position. Unit is in 10^8 degree
<log>
Longitude of current position. Unit is in 10^8 degree
<alt>
MSL Altitude. Unit is meters.
<date>
UTC Date. Output format is ddmmyyyy
<time>
UTC Time. Output format is hhmmss.s
< unconfidence >
Unconfidence of the location, GPS fixed report 39, cell fixed report 100.
< uncertainty_meter >
Uncertainty meters.
Examples
AT+CGPS?
OK
AT+CGPS=1,1
OK
17.2

AT+CGPSINFO Get GPS fixed position information

Description
This command is used to get current position information.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CGPSINFO=?
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CCGPSINFO: (scope of <time>)
Smart Machine Smart Decision
371 2017-12-25