At+Cdelta Set The Module Go To Recovery Mode; At+Criic Read Values From Register Of Iic Device - SimCom SIM7500 Series At Command Manual
Hide thumbs
Also See for SIM7500 Series:
- Command manual (41 pages) ,
- At command manual (29 pages) ,
- User manual (18 pages)
Table of Contents
Advertisement
+CPMVT: (0-1),(3200-4000),(4000-4300)
OK
10.8
AT+CDELTA Set the module go to recovery mode
Description
This command is used to set the module go to recovery mode.
SIM PIN
References
NO
Vendor
Syntax
Write Command
AT+CDELTA
Defined values
NOTE：the command will write flag to the module and reboot the module, then the module will
reboot and read the flag and enter recovery mode to update the firmware.
Examples
AT+CDELTA
OK
10.9
AT+CRIIC Read values from register of IIC device
Description
This command is used to read values from register of IIC device.
SIM PIN
References
NO
Vendor
Syntax
Test Command
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
OK
ERROR
Responses
Smart Machine Smart Decision
233
2017-12-25
Advertisement
Table of Contents
Need help?
Do you have a question about the SIM7500 Series and is the answer not in the manual?