At+Cmgw Write Message To Memory - SimCom SIM7500 Series At Command Manual

Test Command
AT+CMSS=?
Write Command
AT+CMSS=
<index> [,<da>[,<toda>]]
Defined values
<index>
Integer type; value in the range of location numbers supported by the associated memory and start
with zero.
<da>
Destination-Address, Address-Value field in string format; BCD numbers (or GSM 7 bit default
alphabet characters) are converted to characters of the currently selected TE character set, type of
address given by <toda>.
<mr>
Message Reference
GSM 03.40 TP-Message-Reference in integer format.
<toda>
TP-Destination-Address, Type-of-Address octet in integer format. (when first character of
(IRA 43) default is 145, otherwise default is 129). The range of value is from 128 to 255.
NOTE: In text mode, the maximum length of an SMS depends on the used coding scheme: It is
160 characters if the 7 bit GSM coding scheme is used.
Examples
AT+CMSS=3
+CMSS: 0
OK
AT+CMSS=3,"13012345678"
+CMSS: 55
OK
7.15

AT+CMGW Write message to memory

Description
This command is used to store message (either SMS-DELIVER or SMS-SUBMIT) to memory
storage <mem2>.
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
OK
Responses
+CMSS: <mr>
OK
ERROR
If sending fails:
+CMS ERROR: <err>
Smart Machine Smart Decision
176
<da> is +
2017-12-25