At+Crlp Radio Link Protocol - SimCom SIM7500 Series At Command Manual

4 – data circuit asynchronous (RDI)
<ce>
0 – transparent
1 – non-transparent
NOTE: If <speed>
to 0.
Examples
AT+CBST=0,0,1
OK
AT+CBST?
+CBST:0,0,1
OK
6.4

AT+CRLP Radio link protocol

Description
Radio Link Protocol(RLP) parameters used when non-transparent data calls are originated may be
altered with write command.
Read command returns current settings for each supported RLP version <verX>. Only RLP
parameters applicable to the corresponding
Test command returns values supported by the TA as a compound value. If ME/TA supports several
RLP versions <verX>, the RLP parameter value ranges for each
line.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CRLP=?
Read Command
AT+CRLP?
SIM7500_SIM7600 Series_AT Command Manual_V1.07
is set to 116 or 134, it is necessary that
<verX>
Responses
+CRLP: (list of supported <iws>s), (list of supported <mws>s),
(list of supported <T1>s), (list of supported <N2>s)
[,(list of supported <T4>s)]][<CR><LF>
+CRLP: (list of supported <iws>s), (list of supported <mws>s),
(list of supported <T1>s), (list of supported <N2>s)
[,(list of supported <T4>s)]]
[...]]
OK
Responses
+CRLP: <iws>, <mws>, <T1>,
<LF>
Smart Machine Smart Decision
<name> is equal to 1 and
are returned.
<verX> are returned in a separate
<N2> [,<ver1>
111
<ce> is equal
[,<ver1>
[,<ver2>
[, <T4>]][<CR>
2017-12-25