At+Cusbpidswitch Change Module's Pid - SimCom SIM7500 Series At Command Manual

4.23

AT+CUSBPIDSWITCH Change module's PID

Description
Execution command change the module's PID. This command will reset the module if change to
other PID (not current used PID).
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CUSBPIDSWITCH=?
Read Command
AT+CUSBPIDSWITCH?
Write Command
AT+CUSBPIDSWITCH=<p
id>, < reserve1>,< reserve2>
Defined values
<pid>
This command support pids, 9001 is the default value.
9000,9001,9002,9003,9004,9005,9006,9007,9011
< reserve1>
0 or 1, this value is for the reserve
< reserve2>
0 or 1, this value is for the reserve
Examples
AT+CUSBPIDSWITCH?
+CUSBPIDSWITCH: 9001
OK
AT+CUSBPIDSWITCH=9001,1,1
OK
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CUSBPIDSWITCH:
(9000,9001,9002,9003,9004,9005,9006,9007,9011),(0-1),(0-1)
OK
ERROR
Responses
+CUSBPIDSWITCH: <pid>
OK
ERROR
Responses
OK
ERROR
Smart Machine Smart Decision
75 2017-12-25