At+Csmp Set Text Mode Parameters - SimCom SIM7500 Series At Command Manual

OK
AT+CSCB=0,"15-17,50,86",""
OK
7.6

AT+CSMP Set text mode parameters

Description
This command is used to select values for additional parameters needed when SM is sent to the
network or placed in storage when text format message mode is selected.
Note: This command not support in CDMA/EVDO mode
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command
AT+CSMP=?
Read Command
AT+CSMP?
Write Command
AT+CSMP=[<fo>[,<vp>[,<p
id>[,<dcs>]]]]
Defined values
<fo>
Depending on the Command or result code: first octet of GSM 03.40 SMS-DELIVER,
SMS-SUBMIT (default 17), SMS-STATUS-REPORT, or SMS-COMMAND (default 2) in integer
format. SMS status report is supported under text mode if
<vp>
Depending on SMS-SUBMIT
(default 167), in time-string format, or if is supported, in enhanced format (hexadecimal coded
string with quotes),
<pid>
GSM 03.40 TP-Protocol-Identifier in integer format (default 0).
<dcs>
GSM 03.38 SMS Data Coding Scheme (default 0), or Cell Broadcast Data Coding Scheme in
integer format depending on the command or result code.
Examples
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
OK
Responses
+CSMP: <fo>,<vp>,<pid>,<dcs>
OK
Responses
OK
<fo> setting: GSM 03.40,TP-Validity-Period either in integer format
(<vp> is in range 0... 255).
Smart Machine Smart Decision
<fo> is set to 49.
160 2017-12-25