At+Cmvp Set Message Valid Period - SimCom SIM7500 Series At Command Manual

OK
7.18

AT+CMVP Set message valid period

Description
This command is used to set valid period for sending short message.
Note: This command not support in CDMA/EVDO mode
SIM PIN References
YES Vendor
Syntax
Test Command
AT+CMVP=?
Read Command
AT+CMVP?
Write Command
AT+CMVP=<vp>
Defined values
<vp>
Validity period value:
0 to 143
144 to 167
168 to 196
197 to 255
Examples
AT+CMVP=167
OK
AT+CMVP?
+CMVP: 167
OK
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CMVP: (list of supported <vp>s)
OK
Responses
+CMVP:<vp>
OK
Responses
OK
ERROR
+CMS ERROR:
(<vp>+1) x 5 minutes (up to 12 hours)
12 hours + (<vp>-143) x 30 minutes
(<vp>-166) x 1 day
(<vp>-192) x 1 week
Smart Machine Smart Decision
<err>
180 2017-12-25