SimCom SIM7500 Series At Command Manual page 285

AT+CIPCCFG=?
Read Command
AT+CIPCCFG?
Write Command
AT+CIPCCFG=[<NmRetry>
][,[<DelayTm>][,[<Ack>][,[
<errMode>][,]<HeaderType
>][,[[<AsyncMode>][,[<Tim
eoutVal>]]]]]]]]
Execution Command
AT+CIPCCFG
Defined values
<NmRetry>
a numeric parameter which is number of retransmission to be made for an IP packet.The default
value is 10.
<DelayTm>
a numeric parameter which is number of milliseconds to delay to output data of Receiving.The
default value is 0.
<Ack>
NOTE: This parameter is only used to be compatible with old TCP/IP command set.
<errMode>
a numeric parameter which sets mode of reporting error result code.
0 error result code with numeric values
1 error result code with string values
< HeaderType >
a numeric parameter that select which data header of receiving data, it only takes effect in
multi-client mode.
0 add data header, the format is
1 add data header, the format is
SIM7500_SIM7600 Series_AT Command Manual_V1.07
+CIPCCFG: (list of supported <NmRetry>s),(list of supported
<DelayTm>s),(list of supported <Ack>s),(list of supported
<errMode>s),(list of supported <HeaderType>s), (list of supported
<AsyncMode>s), (list of supported <TimeoutVal>s)
OK
ERROR
Responses
+CIPCCFG:<NmRetry>,<DelayTm>,<Ack>,<errMode>,<Header-
Type>,<AsyncMode>,<TimeoutVal>
OK
ERROR
Responses
OK
ERROR
Responses
Set default value:
OK
"+IPD<data length>"
"+RECEIVE,<link num>,<data
Smart Machine Smart Decision
length>"
284 2017-12-25