At+Csqdelta Set Rssi Delta Change Threshold - SimCom SIM7500 Series At Command Manual

mode>]
Defined values
<auto>
0 – disable automatic report
1 – enable automatic report
<mode>
0 – CSQ automatic report every five seconds
1 – CSQ automatic report only after
NOTE: If the parameter of
to default value.
Examples
AT+AUTOCSQ=?
+AUTOCSQ: (0-1),(0-1)
OK
AT+AUTOCSQ?
+AUTOCSQ: 1,1
OK
AT+AUTOCSQ=1,1
OK
+CSQ: 23,0 (when <rssi> or <ber> changing)
4.10

AT+CSQDELTA Set RSSI delta change threshold

Description
This command is used to set RSSI delta threshold for signal strength reporting.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CSQDELTA=?
Read Command
AT+CSQDELTA?
SIM7500_SIM7600 Series_AT Command Manual_V1.07
ERROR
<rssi> or
<mode> is omitted when executing write command,
Responses
+CSQDELTA: (list of supported <delta>s)
OK
Responses
+CSQDELTA: <delta>
OK
ERROR
Smart Machine Smart Decision
<ber> is changed
63
<mode> will be set
2017-12-25