At+Cbds Enable/Disable Beidou Session - SimCom SIM7500 Series At Command Manual

Syntax
Test Command
AT+CGPSMODE=?
Read Command
AT+CGPSMODE?
Write Command
AT+CGPSMODE=<mode>
Defined values
<mode>
0 – GPS and GLONASS hybrid, DPO is enabled, when position fixed, GLONASS will be closed
1 – GPS only
2 – GPS and GLONASS hybrid,DPO is disabled
Default value is 0
Examples
AT+CGPSMODE=0
OK
17.22

AT+CBDS Enable/Disable BEIDOU session

Description
This command is used to enable or disable BEIDOU session.
It will take effect only after restarting.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CBDS=?
Read Command
AT+CBDS?
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CGPSMODE: (scope of <mode>)
OK
Responses
+CGPSMODE: <mode>
OK
Responses
OK
ERROR
Responses
+CBDS: (scope of <mode>)
OK
Responses
+CBDS: <mode>
OK
Smart Machine Smart Decision
389 2017-12-25