At+Cmte Control The Module Whether Power Shutdown When The Module's Temperature Upon The Critical Temperature - SimCom SIM7500 Series At Command Manual

This command is used to read the ADC2 value from modem. ME supports 2 types of ADC, which
are raw type and voltage type.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CADC2=?
Write Command
AT+CADC2=<adc>
Defined values
<adc>
ADC2 type:
0 – raw type.
2 – voltage type(mv)
<value>
Integer type value of the ADC2.
Examples
AT+CADC2=?
+CADC2: (0,2)
OK
AT+CADC2=0
+CADC2: 187
OK
10.6 AT+CMTE Control the module whether power shutdown when
the module's temperature upon the critical temperature
Description
This command is used to control the module whether power shutdown when the module's
temperature upon the critical temperature
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CADC2: (range of supported <adc>s)
OK
Responses
+CADC2: <value>
OK
ERROR
Smart Machine Smart Decision
230 2017-12-25