Atv Set Result Code Format Mode - SimCom SIM7500 Series At Command Manual

The command determines how the state of DSR pin works.
SIM PIN References
YES V.25ter
Syntax
Execution Command
AT&S<value>
Defined values
<value>
0 DSR line shall always be on.
1 DSR line shall be on only when DTE and DCE are connected.
Examples
AT&S0
OK
3.20

ATV Set result code format mode

Description
This parameter setting determines the contents of the header and trailer transmitted with result
codes and information responses.
NOTE: In case of using This command without parameter
SIM PIN References
No V.25ter
Syntax
Write Command
ATV[<value>]
Defined values
<value>
0 Information response: <text><CR><LF>
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
OK
ERROR
Responses
If <value> =0
0
If <value> =1
OK
Smart Machine Smart Decision
<value>
will be set to 0.
38 2017-12-25