9.6
AT+CGTFT Traffic Flow Template
Description
This command allows the TE to specify a Packet Filter - PF for a Traffic Flow Template - TFT that
is used in the GGSN in UMTS/GPRS and Packet GW in EPS for routing of packets onto different
QoS flows towards the TE. The concept is further described in the 3GPP TS 23.060 [47]. A TFT
consists of from one and up to 16 Packet Filters, each identified by a unique <packet filter
identifier>. A Packet Filter also has an <evaluation precedence index> that is unique within all TFTs
associated with all PDP contexts that are associated with the same PDP address.
SIM PIN
References
YES
3GPP TS 27.007
Syntax
Test Command
AT+CGTFT=?
Read Command
AT+CGTFT?
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CGTFT: <PDP_type>,(list
identifier>s),(list
of
index>s),(list
of
supported
mask>s),(list of supported
(ipv6)>s),(list of supported
supported
<source port
range>s),(list of supported
parameter index
(spi)>s),(list of supported
(ipv4) and mask / traffic class (ipv6) and
<flow label
(ipv6)>s)
[<CR><LF>+CGTFT: <PDP_type>,(list of supported
identifier>s),(list
of
index>s),(list
of
supported
mask>s),(list of supported
(ipv6)>s),(list of supported
supported
<source port
range>s),(list of supported
parameter index
(spi)>s),(list of supported
(ipv4) and mask / traffic class (ipv6) and
<flow label
(ipv6)>s)
[...]]
OK
ERROR
Responses
+CGTFT:
[<cid>,<packet filter identifier>,<evaluation precedence
index>,<source address and subnet mask>,<protocol number (ipv4)
/ next header (ipv6)>,<destination port range>,<source port
Smart Machine Smart Decision
of
supported
<packet
supported
<evaluation
<source
address
<protocol number (ipv4) / next header
<destination port
range>s),(list of
<type of service (tos)
mask>s),(list of supported
supported
<evaluation
<source
address
<protocol number (ipv4) / next header
<destination port
range>s),(list of
<type of service (tos)
mask>s),(list of supported
201
filter
precedence
and
subnet
<ipsec security
<packet filter
precedence
and
subnet
<ipsec security
2017-12-25
Need help?
Do you have a question about the SIM7500 Series and is the answer not in the manual?