At&F Set All Current Parameters To Manufacturer Defaults - SimCom SIM7500 Series At Command Manual

Short result code format: <numeric code><CR>
1 Information response: <CR><LF><text><CR><LF>
Long result code format: <CR><LF><verbose code><CR><LF>
Examples
ATV1
OK
3.21 AT&F Set all current parameters to manufacturer defaults
Description
This command is used to set all current parameters to the manufacturer defined profile.
NOTE:List of parameters reset to manufacturer default can be found in defined values, factory
default settings restorable with AT&F[<value>].
Every ongoing or incoming call will be terminated.
SIM PIN References
NO V.250
Syntax
Execution Command
AT&F[<value>]
Defined values
<value>
0 — Set some temporary TA parameters to manufacturer defaults. The setting after power on or reset is
same as value 0.
default values
TA parameters
AT+CATR
AT+CNMP
AT+CNAOP ①
AT+CTZU
AT+CVAUXV
① The default value of no CDMA/EVDO version is 7,9,5,3,11,2,4
Examples
AT&F
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
OK
VALUE
0
2
7,9,4,2,5,3,11
0
2850
Smart Machine Smart Decision
39 2017-12-25