At+Csdh Show Text Mode Parameters - SimCom SIM7500 Series At Command Manual

AT+CSMP=17,23,64,244
OK
7.7

AT+CSDH Show text mode parameters

Description
This command is used to control whether detailed header information is shown in text mode result
codes.
Note: This command not support in CDMA/EVDO mode
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command
AT+CSDH=?
Read Command
AT+CSDH?
Write Command
AT+CSDH=<show>
Execution Command
AT+CSDH
Defined values
<show>
0 – do not show header values defined in commands
<tosca>, <fo>, <vp>,
AT+CMGL,
mode; for SMS-COMMANDs in
<da>, <toda>,
1 – show the values in result codes
Examples
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CSDH: (list of supported <show>s)
OK
ERROR
Responses
+CSDH: <show>
OK
Responses
OK
ERROR
Responses
Set default value (<show>=0):
OK
ERROR
<pid> and <dcs>) nor <length>,
AT+CMGR result codes for SMS-DELIVERs and SMS-SUBMITs in text
AT+CMGR
<length> or <data>
Smart Machine Smart Decision
AT+CSCA and AT+CSMP
<toda> or <tooa>
result code, do not show <pid>, <mn>,
161
(<sca>,
in +CMT,
2017-12-25