At&E Set Connect Result Code Format About Speed - SimCom SIM7500 Series At Command Manual

Defined values
<value>
0 – Don't report
1 – Report communication protocol. And report APN, uplink rate, downlink rate if PS call.
Refer to
"NONE","PPPoverUD","AV32K","AV64K","PACKET". And APN in string format while
uplink rate and downlink rate in integer format with kb unit.
Examples
AT\V0
OK
3.25 AT&E Set CONNECT Result Code Format About Speed
Description
This parameter setting determines to report Serial connection rate or Wireless connection speed. It
is valid only ATX above 0.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Write Command
AT&E<value>
Execution Command
AT&E
Defined values
<value>
0 – Wireless connection speed in integer format.
1 – Serial connection rate in integer format. Such as: "115200"
Examples
AT&E0
OK
SIM7500_SIM7600 Series_AT Command Manual_V1.07
AT&E. The maybe
Responses
OK
ERROR
Responses
Set default value: 1
OK
Smart Machine Smart Decision
communication protocol
42
report include
2017-12-25