At+Ifc Set Local Data Flow Control - SimCom SIM7500 Series At Command Manual

Examples
AT+ICF?
+ICF: 3,3
OK
AT+ICF=?
+ICF: (1-6),(0-3)
OK
AT+ICF=3,3
OK
3.14

AT+IFC Set local data flow control

Description
The command sets the flow control mode of the module.
SIM PIN References
NO V.25ter
Syntax
Test Command
AT+IFC=?
Read Command
AT+IFC?
Write Command
AT+IFC=<DCE>[,<DTE>]
Execution Command
AT+IFC
Defined values
<DCE>
0 – none (default)
2 – RTS hardware flow control
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+IFC: (list of supported<DCE>s), (list of supported<DTE>s)
OK
ERROR
Responses
+IFC: <DCE>,<DTE>
OK
ERROR
Responses
OK
ERROR
Responses
Set default value:
OK
ERROR
Smart Machine Smart Decision
34 2017-12-25